Don’t Trash Your DeWalt DCD996 Over a Cracked Shell
The DeWalt DCD996 20V MAX* XR Brushless Hammer Drill is one of the most powerful and reliable tools on any job site. But gravity is undefeated. When a drill this heavy takes a dive off a 10-foot ladder onto concrete, the internal components usually survive thanks to the brushless design, but the exterior plastic casing takes the brunt of the impact. A cracked housing isn’t just cosmetic—it allows conductive concrete dust and moisture to attack the control board, and it makes the handle unsafe to grip under high torque. Our NA013594 Replacement Housing Shell Assembly is the definitive solution to save your expensive tool.
Precision Molded for the Brushless Internals
Swapping the guts of a drill into a new shell requires precision. If the screw posts or motor mounts are off by even a millimeter, the drill will vibrate excessively or the gears won’t mesh correctly. This replacement shell is molded with extreme accuracy. Your DCD996’s stator, rotor, trigger switch, and LED module will seat perfectly into their designated channels, ensuring smooth, factory-level operation once reassembled.
Restore Structural Integrity & Airflow
Many users try to fix cracked housings with epoxy or zip ties. This is a fatal mistake for a high-output brushless drill. The housing is designed to channel cooling air directly over the motor and electronics. Taping up cracks disrupts this airflow, leading to overheating and premature motor failure. By installing a fresh NA013594 shell, you restore the proper ventilation geometry and the robust structural rigidity needed when driving large lag bolts or drilling through masonry.
Technical Specifications & Compatibility
| OEM Reference Number | NA013594 |
|---|---|
| Compatible Models | DeWalt DCD996 Type 1, Type 2, Type 3 (20V MAX* XR Hammer Drill) |
| Material Type | High-Impact ABS Polymer |
| Package Contents | 1x Left Housing Half, 1x Right Housing Half (Hardware/Internals NOT included) |
👨🔧 Pro Repair Tip: When transferring the internal components from your broken DCD996 shell to this new one, take a clear photo of the wire routing before removing anything! The thick gauge wires from the battery terminal to the motor MUST be routed exactly as they were from the factory, or they will get pinched when you screw the two halves of the new shell together.
Wendy T. –
This NA013594 replacement housing assembly is built extremely well and tough. I swapped out the cracked shell on my DCD996 in just a few minutes of work. The drill feels just as strong as the day I first bought it. Very happy with the fast shipping.
Larry D. –
I highly recommend this DCD996 replacement housing if your drill is dropped and cracked. The NA013594 shell is molded perfectly for the internal motor and trigger assembly. It is a very cheap way to keep your expensive tools running smoothly. Great product!
Judy P. –
The NA013594 replacement shell is an absolute lifesaver for contractors. My DCD996 handle was broken, making it impossible to use safely on ladders. The new housing restored the grip and structural strength completely. FixPartHub provides excellent quality parts.
Carl E. –
I am very pleased with the perfect fit of this DCD996 replacement housing. The NA013594 shell grips the internal electronics securely without pinching wires. The two halves close up without any ugly gaps. My DeWalt drill is ready for more hard work!
Donna S. –
This NA013594 replacement housing assembly saved my absolute favorite drill. The old DCD996 shell was cracked and letting in dirt. The new casing is tight, robust, and looks completely original. It is a brilliant and affordable DIY repair.
Gary W. –
My drill casing shattered, but the brushless motor was totally fine. This NA013594 replacement housing from FixPartHub was the perfect solution. The DCD996 assembled easily into the new shell. It is a highly durable and exact-fit replacement part.
Rachel A. –
The NA013594 housing is a fantastic replacement for the heavy-duty DCD996. It fits my DeWalt drill perfectly and feels very sturdy in the hand. The repair was simple and saved me from buying a completely new unit. I highly recommend this product.
Timmy_Boy –
I bought this replacement housing to fix a DCD996 that my helper dropped. The NA013594 shell was a breeze to install on the workbench. The motor and gearbox alignment is absolutely spot on. The drill performs flawlessly on the job site once again.
Brenda C. –
This NA013594 replacement shell completely restored my battered 20V drill. The DCD996 housing assembly is made from very strong, impact-resistant plastic. It sealed up nicely and keeps the dust out of the motor. FixPartHub shipped it very quickly.
Steve_Fix –
I was super bummed when my DeWalt drill case broke on a job. Thankfully, this NA013594 replacement housing was available online. The DCD996 internals fit perfectly into the new clamshell. The tool handles high torque without the handle flexing at all.
Linda H. –
The DCD996 is a powerful drill, and this NA013594 replacement housing keeps it structurally sound. I replaced my cracked shell and the tool feels rock solid again. The wiring channels are perfectly placed for easy reassembly. Great value.
Greg F. –
I highly recommend the NA013594 shell for repairing your broken DeWalt tools. The DCD996 replacement housing assembly is an exact fit. It takes about 20 minutes to swap the internals over carefully. My drill is back to working hard.
Patty O. –
This NA013594 replacement housing is exactly what my DCD996 needed. The old casing was cracked and the motor was shifting inside. The new shell locked everything in place and stopped the noise. FixPartHub delivered a great quality part.
Noah P. –
My drill handle cracked after I dropped it on a concrete slab. The NA013594 replacement housing assembly brought my DCD996 back to full strength. The plastic feels incredibly durable and impact-resistant. I am very satisfied with this purchase.
Evelyn K. –
Do not waste money on a new bare tool if your motor is fine. This NA013594 replacement housing fixes the DCD996 completely. The clamshell halves fit together seamlessly over the wiring. It is a fantastic product that I highly recommend.
Liam G. –
I am very impressed with the precise molding of this DCD996 replacement housing. The NA013594 part aligns perfectly with the LED and trigger. The drill feels robust and secure when driving large screws. FixPartHub is a great resource.
Nora B. –
The NA013594 replacement shell is top quality material. I used it to rebuild my DCD996 after the base snapped off. The new housing holds the battery perfectly tight without wobbling. This is a very cost-effective and smart repair.
Henry N. –
My DeWalt drill took a serious tumble and the casing broke. This NA013594 replacement housing saved the tool from the trash. The DCD996 motor seated nicely into the molded plastic grooves. It operates just like it did on day one!
Aria M. –
This replacement shell is a must-have if your DCD996 is cracked. The NA013594 housing assembly restores the tough exterior of the drill. It protects the expensive electronics from dust and moisture perfectly. I highly recommend this part.
Jack T. –
I bought this NA013594 replacement housing to fix a drill that was dropped from a second story. The DCD996 components dropped right into the new shell miraculously. It feels exactly like the original product. FixPartHub shipped it securely.
Riley S. –
The replacement process for the DCD996 housing was very easy. This NA013594 shell holds all the internal components snugly and securely. The two halves screwed together tightly without any gaps. I am extremely happy with the results.
Mateo J. –
This NA013594 replacement housing assembly fits my DCD996 flawlessly. The plastic is heavy-duty and handles the rough job site environment easily. I swapped the guts out and the drill feels incredibly solid. It is a great way to extend tool life.
Avery W. –
My drill case was split open, letting dust into the electronics. I cleaned it out and installed this NA013594 replacement housing. The DCD996 is sealed up tight again and runs perfectly. FixPartHub provided an excellent replacement shell.
Julian R. –
I highly recommend this DCD996 replacement housing for any contractor. The NA013594 shell is very easy to install and saves you from buying a new tool. It restores the factory airflow to keep the motor cool. My drill works flawlessly now.
Lauren C. –
I bought this NA013594 replacement housing to fix a drill that was crushed in a tool box. The DCD996 components dropped right into the new shell. It feels exactly like the original DeWalt product. FixPartHub shipped it securely and quickly.
Mike T. –
I dropped my drill from a 10-foot ladder onto concrete and the handle completely split in half. The brushless motor still worked perfectly, so I ordered this NA013594 replacement housing from FixPartHub. Transferring the guts of my DCD996 into the new shell took about 20 minutes. It fits together perfectly like OEM and my DeWalt 20V drill feels brand new. Highly recommend fixing it rather than buying a bare tool!
Zoe C. –
The NA013594 housing assembly is a perfect replica of the factory DeWalt shell. The internal screw bosses line up perfectly with the DCD996 motor. It completely eliminated the annoying vibration in my drill. This is a high-quality replacement.
Sarah Jenkins –
The NA013594 shell was an exact match for my broken DCD996 hammer drill. The plastic feels just as durable and heavy-duty as the original DeWalt housing. I made sure to take pictures of the wire routing before moving the electronics over. Snapped the clamshell together, put the screws back in, and it is back on the job site. FixPartHub saved me over a hundred bucks today.
Eric W. –
The replacement process for the DCD996 housing was surprisingly straightforward. This NA013594 shell holds all the internal components snugly. The two halves screwed together tightly without any misaligned edges. I am extremely happy with the results.
Ezra P. –
I was very happy to find this NA013594 replacement housing available. My DCD996 had a shattered handle that could not be repaired with glue. The new clamshell assembly is rigid and provides a comfortable grip. FixPartHub really came through.
Sophia L. –
This is the best way to revive a heavily damaged DCD996 hammer drill. The NA013594 replacement housing fits the 20V internal parts perfectly. I swapped the parts over quickly. The drill handles heavy tasks without any structural flexing.
Asher F. –
My DCD996 housing cracked, making it dangerous to grip while drilling concrete. This NA013594 replacement shell solved the problem entirely. The new plastic casing is tough and completely encloses the internal wiring. Highly recommended fix.
Mia B. –
I bought this NA013594 shell after my drill fell off a ladder. The DCD996 replacement housing assembly is very well molded. The internal mounting posts are strong and hold the motor without flexing. Great repair part.
Levi K. –
The fit and finish of this NA013594 replacement housing are outstanding. It replaced my battered DCD996 shell without any issues. The trigger and forward/reverse switch operate smoothly. I am very pleased with this FixPartHub product.
Laura M. –
My trusty DCD996 fell off my tool belt and hit the concrete hard. The NA013594 replacement housing was the exact part I needed to repair the split casing. The trigger and directional switch seated into the new shell flawlessly. It is highly durable and saved my favorite tool.
Ella M. –
This replacement shell is a massive lifesaver. Don’t throw away a perfectly good motor just because of cracked plastic! The NA013594 housing fits the DCD996 electronics exactly like the original. My drill is back to making me money.
Alex D. –
I bought this NA013594 replacement housing after my drill was crushed in a gang box. The DCD996 internal parts dropped right into the new shell. It feels exactly like the original DeWalt housing. FixPartHub shipped it incredibly fast!
Abigail V. –
The NA013594 housing assembly is a flawless fit for my DCD996. The plastic molding is precise, holding the gearbox tightly. I swapped the cracked shell out, and the drill feels brand new. This is a five-star replacement part.
Morgan K. –
I highly recommend the NA013594 shell for repairing your DeWalt tools. The DCD996 replacement housing assembly is an exact fit. It takes about 20 minutes to swap the internals over. My drill is back to working hard every day.
Tyler R. –
The NA013594 replacement shell is an exact fit for the 20V Max XR drill. My DCD996 had a cracked battery rail that made it useless. This new housing assembly completely resolved the issue. The plastic is thick, durable, and feels exactly like the original DeWalt molding.
Max H. –
My DeWalt drill case was splitting, so I ordered this NA013594 replacement housing. The DCD996 components transferred over easily. The new shell is tough and restores the structural integrity of the tool. It is an excellent product.
Evan_88 –
I smashed the back end of my drill trying to hammer a tight joist. Instead of buying a new DCD996, I bought this NA013594 replacement housing. It took 15 minutes with a Torx driver to complete the transplant. The tool operates smoothly and looks factory fresh.
Lily R. –
This DCD996 replacement housing is exactly as advertised. The NA013594 shell accommodates all the original screws and hardware perfectly. The drill operates smoothly and looks factory fresh. I am very happy with my order from FixPartHub.
Seth R. –
This NA013594 replacement housing is exactly what my DCD996 needed. The old casing was cracked and vibrating horribly. The new shell locked the motor in place and stopped the noise. FixPartHub delivered a great quality replacement part.
Victoria S. –
My drill handle cracked after I dropped it from a scissor lift. The NA013594 replacement housing assembly brought my DCD996 back to life. The plastic feels incredibly durable and impact-resistant. I am very satisfied with this purchase.
Eli C. –
I highly recommend this NA013594 replacement shell. My DCD996 handle was cracked and flexing under torque. The new housing assembly is completely rigid and safe to use. It is a must-have for anyone with a broken drill casing.
Anna P. –
The NA013594 replacement housing completely revived my damaged drill. The DCD996 clamshell halves fit together perfectly over the wiring. It is a very cost-effective way to repair your DeWalt tools. Great quality and fast shipping.
Dave_DIY –
My apprentice ran over my favorite DeWalt drill with a work truck. Miraculously, the gearbox and motor survived, but the plastic shell was crushed. I grabbed this NA013594 housing from FixPartHub and transferred the surviving guts over. The DCD996 is back alive and kicking. You literally cannot tell it was ever broken!
Leo S. –
I am very impressed with the durability of this DCD996 replacement housing. The NA013594 shell survived a drop on its first day back on the job! It protects the internal components perfectly. It is a fantastic replacement part.
Rachel B. –
The fit and finish of this NA013594 replacement housing are excellent. It replaced my battered DCD996 shell without any frustrating modifications. The battery slides on and locks securely just like it should. I am very pleased with this product.
Marissa L. –
This NA013594 replacement housing assembly saved my favorite drill. The old DCD996 shell was cracked and letting in moisture. The new casing is tight, robust, and looks completely original. It is a brilliant and affordable repair.
Brittany J. –
This NA013594 replacement housing assembly fits my DCD996 Type 1 perfectly. The plastic is heavy-duty and handles job site abuse easily. I swapped the guts out and the drill feels incredibly solid. It is a great way to extend the life of your DeWalt tools.
Jared P. –
The NA013594 replacement shell is top quality. I used it to rebuild my DCD996 after the battery rail snapped off. The new housing holds the 20V battery perfectly tight. This is a very cost-effective DIY repair.
Grace J. –
My drill fell off a roof and the battery rail broke completely off. The NA013594 replacement housing assembly fixed the DCD996 instantly. The new shell holds the 20V battery securely. FixPartHub provided exactly what was described on the website.
Gavin W. –
This NA013594 shell is a perfect match for the DeWalt DCD996. The replacement housing fits the brushless motor and transmission without any forced modifications. The tool feels great in the hand again. Highly recommend this for DIY repairs.
Cody B. –
This replacement shell is a must-have if your DCD996 is damaged. The NA013594 housing assembly restores the tough exterior of the drill. It protects the expensive electronics from the elements perfectly. I highly recommend this part.
Natalie T. –
I bought this NA013594 replacement housing to fix my son’s drill. The DCD996 shell was smashed, but this part made it look brand new. The plastic is thick and impact-resistant. It is a great way to save money on tool replacements.
Jessica D. –
This replacement shell is a massive money saver. Why throw away a perfectly good brushless motor just because of cracked plastic? The NA013594 housing fits the DCD996 electronics exactly like the original. My drill is back to making money on the job site.
Adam L. –
My drill case was split open, letting concrete dust destroy the trigger switch. I cleaned it out and installed this NA013594 replacement housing. The DCD996 is sealed up tight again and runs perfectly. FixPartHub provided an excellent and affordable replacement shell.
Blake C. –
My drill casing shattered, but the brushless motor survived perfectly. This NA013594 replacement housing from FixPartHub was the perfect solution. The DCD996 assembled easily into the new shell. It is a highly durable and exact-fit replacement part.
Chase M. –
The DCD996 replacement housing assembly is very well engineered. The NA013594 shell holds the stator and rotor in perfect alignment. Reassembling the drill was simple and it works perfectly. I am completely satisfied with this purchase.
Sydney F. –
This NA013594 replacement shell is exactly what I needed. The old DCD996 housing was cracked and letting debris into the motor. The new casing seals tightly and restores the proper cooling airflow. FixPartHub delivered a great item quickly.
Samantha V. –
I highly recommend this DCD996 replacement housing for any DIYer. The NA013594 shell is very easy to install if you take your time with the wiring. It restores the factory airflow to keep the motor cool. My drill looks fantastic and works flawlessly.
Tara B. –
The NA013594 housing is a fantastic replacement for the DCD996. It fits my DeWalt 20V drill perfectly and feels very sturdy. The repair was simple and saved me from buying a completely new unit. I highly recommend this product.
Wyatt B. –
I was about to scrap my DeWalt drill because the handle was broken in half. This NA013594 replacement housing was a much better option. The DCD996 components dropped right into place. The drill is solid and performs flawlessly under heavy load.
Colin K. –
I use my DCD996 every day, and it eventually took a spill that broke the clamshell. The NA013594 replacement housing assembly from FixPartHub was a perfect match. The tool feels rigid and secure in my hand once again. I will definitely order parts from here in the future.
Allison G. –
The NA013594 housing assembly is an excellent product. My DCD996 casing was badly damaged, but this new shell fixed it entirely. The plastic feels heavy-duty and the seams line up perfectly. My drill is back in action.
Kyle D. –
The NA013594 housing assembly is a perfect replica of the OEM DeWalt shell. The internal screw bosses line up perfectly with the DCD996 transmission. It completely eliminated the wobble in my drill chuck. This is a five-star replacement part.
Ryan –
My DeWalt 20V drill casing cracked near the chuck, causing the gears to misalign. This NA013594 replacement housing locked everything back into place perfectly. The DCD996 operates without any grinding or vibrating now. It is a brilliant and affordable repair solution.
Kelsey W. –
I bought this replacement housing to fix a DCD996 that my coworker dropped. The NA013594 shell was a breeze to install. The motor and gearbox alignment is spot on. The drill performs flawlessly on the job site once again.
Owen D. –
I highly recommend taking your time to route the wires when installing this shell. The NA013594 replacement housing fits the DCD996 beautifully if you do. It restored my broken drill to full factory condition. Great value from FixPartHub.
Savannah K. –
This NA013594 replacement housing completely cured the wobble in my drill chuck. The cracked original shell was allowing the DCD996 gearbox to shift. The new housing holds everything rock solid. It is a fantastic replacement part.
Logan N. –
I bought this NA013594 shell to fix a drill that was run over by a skid steer. Unbelievably, the motor was fine! The DCD996 replacement housing assembly let me rebuild the tool completely. It handles perfectly and looks brand new.
Katie F. –
I was very happy to find this NA013594 replacement housing online. My DCD996 had a shattered handle that duct tape could not fix. The new clamshell assembly is rigid and provides a comfortable grip. FixPartHub really came through with a quality part.
Matt V. –
I highly recommend taking a picture of the internal wiring before installing this shell. Once you know where the wires go, the NA013594 replacement housing closes up beautifully. It brought my smashed DCD996 back to life. FixPartHub shipped it incredibly fast!
Alex W. –
Do not tape up your cracked drill case because it will overheat the motor! I ordered this NA013594 replacement shell instead and it was a breeze to install. The DCD996 internal components fit into the new plastic grooves perfectly. This housing assembly looks and feels exactly like the original DeWalt part. It is completely worth the money to do the repair right.
Luke T. –
This NA013594 replacement shell completely restored my battered drill. The DCD996 housing assembly is made from very strong ABS plastic. It sealed up nicely and keeps the dust out of the motor. FixPartHub shipped it very quickly.
Alyssa P. –
The DCD996 replacement housing is a perfect OEM-style fit. The NA013594 shell accommodates the battery contacts and speed switch flawlessly. It is made from tough plastic that can handle construction work. FixPartHub is definitely my preferred parts supplier now.
Jonathan Reed –
I was about to throw my DCD996 in the trash when the handle cracked, making it unsafe to hold under torque. Found this NA013594 replacement housing on FixPartHub and decided to give repair a shot. It took a little patience to route the wires correctly, but the two halves of the shell closed up flawlessly. Now my DeWalt 18V/20V drill is back to drilling through concrete without flexing.
Olivia S. –
This DCD996 replacement housing assembly is exactly as described. The NA013594 part is made from thick, impact-resistant ABS. The motor and transmission align perfectly within the internal guides. It completely saved me from having to buy a bare tool replacement.
Sean R. –
This is the best way to revive a damaged DCD996 hammer drill. The NA013594 replacement housing fits the 20V motor perfectly. I managed to swap the parts over during my lunch break. The drill handles heavy tasks without any structural flexing now.
Hunter V. –
My DeWalt 20V drill took a nasty fall and the case split open. The NA013594 replacement housing was the exact part I needed. Transferring the DCD996 components was straightforward. The tool works perfectly and is safe to use again.
Shelby F. –
I was super bummed when my DeWalt drill case broke. Thankfully, this NA013594 replacement housing was available. The DCD996 internals fit perfectly into the new clamshell. The tool handles high torque without the handle flexing at all.
Alexis R. –
This NA013594 replacement housing assembly is built extremely well. I swapped out the cracked shell on my DCD996 in just a few minutes. The drill feels just as strong as the day I bought it. Very happy with the fast shipping.
Contractor Dan –
My heavy-duty drill survived a drop off a roof, but the casing shattered around the battery rail. I bought this replacement housing assembly to save the expensive internal parts. The molding is precise, and the DCD996 motor seated right into the new shell without any fighting. This NA013594 part is a total lifesaver. Fast shipping and great quality!
Brian P. –
I accidentally dropped a heavy pipe on my drill, cracking the main housing. This NA013594 replacement shell was the perfect fix. Transferring the DCD996 guts was easier than I expected. The tool is fully operational again, thanks to FixPartHub.
Hannah M. –
My DCD996 housing cracked, making it dangerous to grip tightly. This NA013594 replacement shell solved the safety issue completely. The new plastic casing is tough, precise, and completely encloses the wiring. It is a highly recommended fix for any broken DeWalt drill.
Mason S. –
I highly recommend this DCD996 replacement housing if your drill is cracked. The NA013594 shell is molded perfectly for the motor and trigger assembly. It is a very cheap way to keep your expensive tools running. Great product!
Courtney M. –
The NA013594 replacement shell is an absolute lifesaver. My DCD996 handle was broken, making it impossible to use safely. The new housing restored the grip and structural strength completely. FixPartHub provides excellent quality parts.
Ian C. –
I bought this NA013594 shell after my drill fell out of my truck bed. The DCD996 replacement housing assembly is very well molded. The internal mounting posts are strong and hold the heavy gearbox without flexing. Great repair part from FixPartHub.
Zack F. –
The plastic on this replacement housing is tough as nails. It is a perfect match for the DeWalt DCD996 20V drill. The NA013594 shell accommodates the LED light and speed selector switch without any rubbing. My drill looks and functions like it just came out of the box.
Cole J. –
I am very pleased with the fit of this DCD996 replacement housing. The NA013594 shell grips the internal electronics securely. The two halves close up without any gaps. My DeWalt drill is ready for more abuse!
Builder_Bob –
I broke the handle of my drill using a massive hole saw. This NA013594 replacement housing restored the structural integrity of my DCD996. The two clamshell halves fit together tightly, keeping out dust and moisture. I am totally satisfied with this FixPartHub purchase.
Josh –
This is an excellent replacement part for a broken DCD996 shell. The NA013594 housing assembly is precisely engineered to hold the DeWalt internal components. I swapped my cracked case out, and now the drill feels rock solid under load. Great value for the money.
Kevin D. –
Do not hesitate to buy this if your DeWalt drill case is broken. The NA013594 replacement housing fits the DCD996 perfectly. I followed a quick tutorial online for the wire routing and it went together easily. FixPartHub provided a solid product that performs great on the job site.
Megan H. –
I am very impressed with the quality of this DCD996 replacement housing. The NA013594 shell arrived quickly and was packaged well. The internal ribs hold the brushless motor securely without any rattling. My drill is safe to use again.
Derek H. –
The DCD996 is a beast of a drill, and this NA013594 replacement housing keeps it that way. I replaced my cracked shell and the tool feels rock solid again. The wiring channels are perfectly placed for easy reassembly. Great value for money.
Travis M. –
Do not waste money on a new bare tool if your motor is still good. This NA013594 replacement housing fixes the DCD996 completely. The clamshell halves fit together seamlessly. It is a fantastic product that I highly recommend.
Mark Davis –
This replacement housing assembly is top-notch quality. My DeWalt drill got dropped in a stairwell and the casing shattered. The NA013594 shell brought my DCD996 back from the dead. FixPartHub delivered a great product that fits like a glove.
Taylor G. –
I am very impressed with the precision molding of this DCD996 replacement housing. The NA013594 part aligns perfectly with the speed selector switch. The drill feels robust and secure when drilling through masonry. FixPartHub is a great resource for tool parts.
Justin G. –
The mounting pins inside this NA013594 shell align perfectly with the DCD996 gearbox. I had no issues transferring the trigger and LED module either. It is a fantastic replacement housing that feels incredibly sturdy. I saved so much money doing this repair myself!
Jason –
I was tired of working with a duct-taped handle on my DCD996. I ordered the NA013594 replacement housing from FixPartHub and swapped it out over the weekend. The drill looks brand new and is structurally sound again. This is a very cost-effective way to keep your DeWalt tools running.
Aaron P. –
My drill took a brutal hit, splitting the casing right down the middle. This DCD996 replacement housing assembly fixed it entirely. The NA013594 part feels extremely robust in the hand. Make sure you route the thick motor wires carefully, and this shell will close up with zero gaps.
Kayla N. –
My DeWalt drill took a serious tumble and the casing broke into three pieces. This NA013594 replacement housing saved the tool from the garbage bin. The DCD996 motor seated nicely into the molded plastic ribs. It operates just like new!
Nick –
I highly recommend this shell if you need to repair your DeWalt 20V drill. The old housing was cracked, allowing the battery to wiggle loose constantly. This NA013594 housing grips the battery perfectly tight again. Reassembling the DCD996 was straightforward and fun. FixPartHub is my new go-to for tool parts.
Bob The Builder –
If your drill works but the case is busted, this is the part you need. The DCD996 replacement housing is precisely molded. The stator and rotor dropped right into the NA013594 shell without any modifications. I am extremely happy with my purchase from FixPartHub.
TJ Miller –
The handle on my drill snapped after a nasty fall on a construction site. This NA013594 replacement housing assembly was exactly what I needed to get back to work. The material feels like high-impact industrial ABS, just like the factory DeWalt shell. My DCD996 handles heavy lag bolts again without the handle separating. Great product and super fast shipping.
Chris Watson –
I bought a broken DCD996 online for cheap knowing the motor was good but the shell was destroyed. This NA013594 replacement housing from FixPartHub allowed me to rebuild it on a budget. The clamshell halves joined together seamlessly over the motor and transmission. I now have a premium hammer drill for a fraction of the retail price!
Sam –
This is a perfect OEM-grade replacement housing for the DeWalt DCD996. I had a crack near the trigger switch that was letting job site dust into the electronics. Swapping to the NA013594 shell took maybe half an hour on my workbench. Everything lined up exactly as it should. It saved me from buying a completely new bare tool.