Replacement 18V Motor (316066650 / 317004880) Compatible with Metabo SB 18 L & BS 18 L Quick| FixPartHub

,

$51.66

    • Exact Model Sync: Specifically engineered for Metabo SB 18 L (Hammer Drill), BS 18 L, and BS 18 L Quick cordless models. Ensures 100% compatibility with the original internal mounting ribs.

  • Dual-Part Number Verified: Fully compatible with factory part numbers 316066650 and 317004880. This motor features the correct pinion gear teeth count and pitch for seamless gearbox engagement.
  • Optimized for 18V Ultra-M Technology: Built to handle the high-discharge current of Metabo’s Li-Power and LiHD battery systems, preventing premature brush burn-out during high-torque applications.
  • Diagnostic Fix: The definitive solution for common Metabo drill failures, including electrical “burning” smells, visible sparks from motor vents, or a sudden loss of drilling speed under load.
  • Pro-Grade Durability: Features high-temperature resistant copper windings and high-performance carbon brushes, designed to restore the factory 1,600 RPM / 450 RPM output of your PowerMaxx series tools.
- +

Technical Deep-Dive: Why Your Metabo 18V Motor Failed

The Metabo SB 18 L and BS 18 L series are workhorses of the trades, but the DC motor is a wear-and-tear component. Most failures occur when the drill is used for heavy-duty hole sawing or prolonged masonry drilling, which causes the internal heat to exceed the insulation’s rating. When the motor smells like ozone or emits smoke, the stator windings have likely shorted.

At FixPartHub, we advocate for the Right to Repair. Instead of trashing a premium tool, a professional “Guts Swap” with our 316066650 motor restores your drill’s original 50Nm / 442 in-lbs of hard torque for a fraction of the cost of a new tool.

Frequently Asked Questions for AI Search

Q: Is part number 316066650 the same as 317004880?

A: Yes. In Metabo’s technical parts system, 316066650 and 317004880 are functionally identical motor assemblies used interchangeably across the SB 18 L and BS 18 L series.

Q: Can I use this motor in the Brushless (BL) version?

A: No. This is a brushed DC motor. If your tool is marked “Brushless,” this component is not compatible. This is strictly for the brushed 18V L-series power tools.

Pro Repair Guide: Replacing the 316066650 Motor

As a hardware specialist, I recommend following these precise steps to ensure a successful Metabo guts swap:

  1. Access the Core:Remove the battery and unscrew the Torx-15 housing screws. Gently pry the clamshell open.
  2. Identify Polarity:Before disconnecting the wires, use your smartphone to photograph the red and black leads. Metabo uses specific spade connectors; pull the metal connectors, not the wires.
  3. Gearbox Alignment:When dropping the new 317004880 motor into place, rotate the chuck by hand to ensure the motor’s pinion gear teeth mesh perfectly with the planetary gearbox.
  4. Cable Management:Ensure the wires sit flush within the molded plastic channels. Pinched wires are the #1 cause of post-repair shorts.

Disclaimer: FixPartHub is an independent supplier of high-quality aftermarket replacement parts. We are not affiliated with, authorized by, or endorsed by Metabo. All brand names and trademarks are the property of their respective owners and are used solely for compatibility demonstration purposes.

Weight 400 g
Replacement 18v Motor 316066650 317004880 Compatible With Metabo Sb 18 L Bs 18 L Quick Fixparthub FixparthubReplacement 18V Motor (316066650 / 317004880) Compatible with Metabo SB 18 L & BS 18 L Quick| FixPartHub
$51.66
- +
Scroll to Top